Hydac Ball Valves

The HYDAC family of dependable high pressure ball valves provide full unrestricted flow and positive shut-off of fluids and gases under extremely rugged service conditions.

Models are available to accommodate system pressures up to 7,250 PSI. Since a variety of materials are available, HYDAC valves can be used with various fluids and gases including petroleum based oils, water-glycols, high water based fluids, and nitrogen. An optional Locking Device is also available.

Two models of HYDAC high pressure ball valves are available:

• KHB – Steel block type housing; sizes 6 through 25 (1/4˝, 3/8˝, 1/2˝, 3/4˝ NPT or SAE).


• KHM – Forged steel type housing; sizes 32 through 50 (1˝, 1½˝, 2˝ NPT or SAE).

Model Selection

HYDAC two-position, three-way diverter ball valves provide full unrestricted flow and positive shut-off of fluids and gases at system pressures to 7250 PSI

Since a variety of materials are available, HYDAC valves can be used with various fluids and gases including petroleum based oils, water glycols, high water based fluids and nitrogen.

Specifications

• 1/4˝ – 1˝ Full port design
• 2 Position
• Carbon steel housing
• NPT or SAE O-ring connections
• Polyacetal ball seals (standard)
• FPM (Fluoroelastomer) O-rings (standard)
• Operating pressure to 7250 psi depending on valve size and seal materials selected.
• Temperature range: 14° to 176°F with standard materials (1114) up to maximum pressure rating. Extended temperature range -40° to 392°F on request with special materials and reduced pressure rating.

Model Selection